Thermal Oxidizer Posts

How Long Does it Take to Build an Oxidizer? Part 1

Mar 8, 2016 3:44:29 PM

One of our most frequently asked questions is, “How long does it take to build an oxidizer?” The answer depends on the client’s procurement process as well as the complexity of the equipment and location of the site. This series of blogs will focus on a typical industrial process utilizing a standard thermal oxidizer, catalytic oxidizer, or regenerative thermal oxidizer. Since this is a complicated topic, we wanted to separate it out into a few steps. In this first blog, we’ll look at the client buying process.

Topics: Air Pollution Control, VOC Emissions, Regenerative Thermal Oxidizer, Thermal Oxidizer, Blog

Environmental Briefings for the Converting Industry

Posted by Jan Carlson

Jun 24, 2014 1:48:00 PM

Adhesives and Silicones

printing9653551_ml

What you need to know:

Topics: Adhesives and Silicone, Thermal Oxidizer, Web Coating, Blog

CPI Installs Thermal Oxidizer for VOC Control of Engine Dynamometer Test Cells

Posted by Jan Carlson

Mar 4, 2014 5:19:00 AM

The worlds largest automotive manufacturer recently installed our QUADRANT SR-Series Thermal Oxidizer to destroy CO and VOC emissions from the exhaust generated by an engine dyno test cell facility. The test facility houses several engine, transmission, and chassis dynamometer’s for gasoline and diesel testing. The manufacturer demanded a system that would provide the highest uptime reliability and highest performance.

Topics: VOC Emissions, Thermal Oxidizer, Automotive Industry, Case Studies, Heat Exchanger, Installation, Engine Dyno Test Cell

Solid Waste Gasification Pollution Abatement

Posted by Jan Carlson

Mar 4, 2014 5:18:00 AM

QUADRANT NR-SD SERIES THERMAL OXIDIZER

Topics: Thermal Oxidizer, Case Studies, Renewable Fuel, Gasification

Landfill RNG VOC Waste Gas Abatement

Posted by Jan Carlson

Mar 4, 2014 5:17:00 AM

Controlling VOC emissions from a landfill renewable natural gas (RNG) purification upgrade system can be achieved with a direct fired thermal oxidizer (DFTO). The QUADRANT-NRV Series Thermal Oxidation System is designed for use with the low-volume/high-BTU waste gas stream emitted from many landfill renewable natural gas purification processes. As we utilize our Venturi Burner Package to process the waste gas directly through the burner, we are able to reduce the size, and thus cost, of the oxidation system.

Topics: VOC Emissions, Thermal Oxidizer, Landfill, Case Studies, Renewable Fuel, RNG, Direct Fired Thermal Oxidizer

Canadian Biofuel Manufacturer requires Air Pollution Control

Posted by Jan Carlson

Mar 4, 2014 5:16:00 AM

With the expected rise in oil prices in the next few years, the increasing instability of the world oil supply, and the increasing demands from the EPA for cleaner fuels and production processes, Food and Plant based Ethanol production is on the rise. Along with this rise in production comes an increased requirement for Air Pollution Control Solutions in the Bio-Fuel’s market.

Topics: Thermal Oxidizer, Case Studies, Installation

Can Coater Chooses the Quadrant SR Thermal Oxidizer for VOC Control

Posted by Jan Carlson

Mar 4, 2014 5:15:00 AM

A metal can decorator worked with Catalytic Products International, Inc to design a unique Thermal (recuperative) Oxidizer. A recuperative thermal oxidizer was chosen over other thermal oxidation systems because of high solvent loads exhausted from the company’s can coating lines and a desire to integrate customized energy recovery system.

Topics: Thermal Oxidizer, Metal Decorating, Case Studies, Installation, Heat Recovery

Flexographic Printer installs Regenerative Thermal Oxidizer for VOC Control

Posted by Jan Carlson

Mar 4, 2014 5:14:00 AM

A flexographic printer recently installed a TRITON-Regenerative Thermal Oxidizer (RTO) from Catalytic Products International, Inc. CPI provided a turnkey installation which included engineering and design of the RTO, the fugitive enclosure system to meet method 204, the ductwork system from all presses, foundation work, electrical integration, and rigged the oxidizer. The project was installed on time and without any added costs.

Topics: Regenerative Thermal Oxidizer, Thermal Oxidizer, Flexographic Printing, Case Studies, Installation

Thermal Oxidizer for the Chemical Industry

Posted by Jan Carlson

Mar 4, 2014 5:12:00 AM

CPI Thermal Oxidizers in Chemical Manufacturing

Topics: Thermal Oxidizer, Chemical Industry, Case Studies, Installation

Textile Manufacturer Installs Thermal Oxidizer for VOC Control

Posted by Jan Carlson

Mar 4, 2014 5:10:00 AM

A synthetic leather manufacturer worked with Catalytic Products International, Inc. to design a unique Thermal (recuperative) Oxidizer. A recuperative thermal oxidizer was chosen because of high solvent LEL (+25%) exhausted from the process and a desire to integrate a hot oil heat recovery system to work with the oil heated production coating/curing line.

Topics: Thermal Oxidizer, Case Studies, Installation, Heat Recovery, Rebates


Regenerative Thermal Oxidizer	Thermal Oxidizer	Catalytic Oxidizer

Thermal Oxidizer Posts

Adhesives and Silicones

hbspt.cta._relativeUrls=true;hbspt.cta.load(329596, '93fe4736-54e6-4b69-8d32-471619d6daab', {"useNewLoader":"true","region":"na1"});

Our Topics