Catalytic Products International (CPI) recently installed Direct Fired Thermal Oxidizer at a Western USA pharmaceutical manufacturer for the abatement of Volatile Organic Compounds (VOCs).
Read More
Topics:
Air Pollution Control,
Thermal Oxidizer,
News,
Pharmaceutical & Medical,
Blog,
Direct Fired Thermal Oxidizer
Catalytic Products International (CPI) rebuilt a QUADRANT SR- 8,500 SCFM Recuperative Thermal Oxidizer used for the control of volatile organic compounds (VOCs) and Hazardous Air Pollutants (HAPs) at a Midwest USA resin-coating facility.
Read More
Topics:
Air Pollution Control,
Maintenance and Repairs,
Thermal Oxidizer,
Blog,
Rebuild,
Recuperative Thermal Oxidizer
Catalytic Products International (CPI) installed a Direct Fired Thermal Oxidizer (DFTO) at a publicly owned wastewater treatment facility for the abatement of Volatile Organic Compounds (VOCs), hydrogen sulfide (H2S), and other separated constituents from the wastewater treatment gas separation process. This project was initiated to generate Renewable Natural Gas (RNG) which can be injected into the local distribution network, while reducing emissions from the existing WWTP facility.
Read More
Topics:
Air Pollution Control,
Thermal Oxidizer,
Blog,
RNG,
Wastewater Treatment (WWTP),
Direct Fired Thermal Oxidizer
Catalytic Products International (CPI) installed a Direct Fired Thermal Oxidizer (DFTO) at a Southwestern USA publicly owned wastewater treatment (WWTP) facility for the abatement of Volatile Organic Compounds (VOCs) and other separated constituents from the wastewater treatment gas separation process.
Read More
Topics:
Air Pollution Control,
Thermal Oxidizer,
Blog,
Renewable Fuel,
RNG,
Wastewater Treatment (WWTP),
Direct Fired Thermal Oxidizer
Catalytic Products International (CPI) installed two (2) 2,600 SCFM Direct Fired Thermal Oxidizers at an East Coast USA fuel cell manufacturer for the abatement of volatile organic compounds (VOCs), hydrogen and carbon monoxide during the fuel cell power conditioning process.
Read More
Topics:
Air Pollution Control,
Thermal Oxidizer,
News,
Blog,
Battery & Fuel Cell,
Direct Fired Thermal Oxidizer
Catalytic Products International (CPI) recently completed the rebuild of a CPI QUADRANT SR- 48,000 SCFM Recuperative Thermal Oxidizer at an Eastern USA metal coil coater for the control of volatile organic compounds (VOCs).
Read More
Topics:
Maintenance and Repairs,
VOC Emissions,
Thermal Oxidizer,
Metal Decorating,
Heat Exchanger,
Coil Coating,
Rebuild,
Recuperative Thermal Oxidizer
Catalytic Products International (CPI) has worked with numerous animal feed manufacturers to develop proven techniques to eliminate odors, volatile organic compound (VOC) and ammonia emissions from the production process of animal nutrition solutions for livestock, poultry and aquaculture.
Read More
Topics:
VOC Emissions,
Thermal Oxidizer,
Case Studies,
Odor,
Installation,
Rendering,
Recuperative Thermal Oxidizer
Recently, Catalytic Products International (CPI) worked with a customer who determined during a routine plant inspection that they had unexpected emissions from their process. This can happen as regulations change and as plants continue to improve operations or even change products or processes. In this case, the customer voluntarily shut down their process immediately until a solution could be found.
Read More
Topics:
Thermal Oxidizer,
Chemical Industry,
Case Studies,
Installation
Catalytic Products International (CPI) recently completed the installation of a new QUADRANT SR-35,000 Thermal Oxidizer to replace an existing 20-year-old Quadrant SR-30,000, Thermal Oxidizer, Primary Heat Exchanger and TSS control system for an automotive parts supplier in the Midwest United States.
Read More
Topics:
Air Pollution Control,
Thermal Oxidizer,
Automotive Industry,
Blog,
Installation,
Recuperative Thermal Oxidizer
