Case Studies Posts

    Chemical Mfg. Plant Avoids Long Term Shut Down with Thermal Oxidizer

    Recently, Catalytic Products International (CPI) worked with a customer who determined during a routine plant inspection that they had unexpected emissions from their process. This can happen as regulations change and as plants continue to improve operations or even change products or processes.  In this case, the customer voluntarily shut down their process immediately until a solution could be found.

    Read More

    Topics: Thermal Oxidizer, Chemical Industry, Case Studies, Installation

    Automotive Parts Coater Exceeds Local Air Quality Requirements

    Today many companies are faced with unique air pollution control problems arising from their part coating operations. Not only are vented emissions required to be controlled, but now a more pressing issue is how to treat fugitive emissions.

    Read More

    Topics: Automotive Industry, Catalytic Oxidizer, Paint & Coatings, Case Studies, Fastener Coating, Installation

    CPI Installs Thermal Oxidizer for VOC Control of Engine Dynamometer Test Cells

    The worlds largest automotive manufacturer recently installed our QUADRANT SR-Series Thermal Oxidizer to destroy CO and VOC emissions from the exhaust generated by an engine dyno test cell facility. The test facility houses several engine, transmission, and chassis dynamometer’s for gasoline and diesel testing. The manufacturer demanded a system that would provide the highest uptime reliability and highest performance.

    Read More

    Topics: VOC Emissions, Thermal Oxidizer, Automotive Industry, Case Studies, Heat Exchanger, Installation, Engine Dyno Test Cell

    Solid Waste Gasification Pollution Abatement


    Read More

    Topics: Thermal Oxidizer, Case Studies, Renewable Fuel, Gasification

    Landfill RNG Waste Gas Abatement

    For nearly 45 years Catalytic Products International has designed and manufactured specialized oxidation systems for use in controlling process-related VOC emissions.

    Read More

    Topics: VOC Emissions, Thermal Oxidizer, Landfill, Case Studies, Renewable Fuel, RNG, Direct Fired Thermal Oxidizer

    Canadian Biofuel Manufacturer requires Air Pollution Control

    With the expected rise in oil prices in the next few years, the increasing instability of the world oil supply, and the increasing demands from the EPA for cleaner fuels and production processes, Food and Plant based Ethanol production is on the rise. Along with this rise in production comes an increased requirement for Air Pollution Control Solutions in the Bio-Fuel’s market.

    Read More

    Topics: Thermal Oxidizer, Case Studies, Installation

    Can Coater Chooses the Quadrant SR Thermal Oxidizer for VOC Control

    A metal can decorator worked with Catalytic Products International, Inc to design a unique Thermal (recuperative) Oxidizer. A recuperative thermal oxidizer was chosen over other thermal oxidation systems because of high solvent loads exhausted from the company’s can coating lines and a desire to integrate customized energy recovery system.

    Read More

    Topics: Thermal Oxidizer, Metal Decorating, Case Studies, Installation, Heat Recovery

    Flexographic Printer System Repair

    A flexographic printer recently contacted Catalytic Products International for help solving a recurring problem with competitors Regenerative Thermal Oxidizer (RTO) that was purchased two years earlier. The system had never been able to pass a stack test; the company was out of compliance and running out of time with the state EPA.  Any calls for assistance in getting the RTO to be compliant by the original manufacturer went unanswered.  Here's how we helped our customer:

    Read More

    Topics: Maintenance and Repairs, Regenerative Thermal Oxidizer, Flexographic Printing, Case Studies

    Flexographic Printer installs Regenerative Thermal Oxidizer for VOC Control

    A flexographic printer recently installed a TRITON-Regenerative Thermal Oxidizer (RTO) from Catalytic Products International, Inc. CPI provided a turnkey installation which included engineering and design of the RTO, the fugitive enclosure system to meet method 204, the ductwork system from all presses, foundation work, electrical integration, and rigged the oxidizer.  The project was installed on time and without any added costs.

    Read More

    Topics: Regenerative Thermal Oxidizer, Thermal Oxidizer, Flexographic Printing, Case Studies, Installation

    Thermal Oxidizer for the Chemical Industry

    CPI Thermal Oxidizers in Chemical Manufacturing

    Read More

    Topics: Thermal Oxidizer, Chemical Industry, Case Studies, Installation

    Get in Touch

    Oxidizer Equipment Solutions
    Oxidizer 101

    Our Topics

    Let us help you with your oxidizer project
    Quote Case Studies