Installation Posts

Building an Oxidizer, Part 3: Compliance Test Readiness

May 2, 2016 3:43:15 PM

One question which we frequently receive is about the length of the process of building and installing an oxidizer. There are many factors which influence the oxidizer installation process, including the client’s procurement process and the complexity of the equipment and location of the site. In this series of blogs, we’ve been taking a look at a typical industrial process utilizing a standard thermal oxidizer, catalytic oxidizer, or regenerative thermal oxidizer. We’ve previously discussed the timelines for the client buying process and oxidizer delivery and installation. In this final blog, we’ll look at the timeline for compliance testing.

Topics: Air Pollution Control, VOC Emissions, Regenerative Thermal Oxidizer, Thermal Oxidizer, Blog, Installation

Building an Oxidizer, Part 2: Delivery and Installation

Posted by Jan Carlson

Apr 15, 2016 5:07:17 PM

At CPI, we are frequently asked about the length of time necessary to build and install an oxidizer. The answer to that question is complicated, depending on a variety of factors such as the client’s procurement process and the complexity of the equipment and location of the site. To help build understanding of the decisions that go into this process, we wanted to take a closer look at a typical industrial process utilizing a standard thermal oxidizer, catalytic oxidizer, or regenerative thermal oxidizer. In our first blog on this topic, we looked at the client buying process. Today, we’ll look at the timeline for oxidizer deliver and installation.

Topics: Air Pollution Control, VOC Emissions, Regenerative Thermal Oxidizer, Thermal Oxidizer, Blog, Installation

Automotive Parts Coater Exceeds Local Air Quality Requirements

Posted by Jan Carlson

Mar 4, 2014 5:19:00 AM

Today many companies are faced with unique air pollution control problems arising from their part coating operations. Not only are vented emissions required to be controlled, but now a more pressing issue is how to treat fugitive emissions.

Topics: Automotive Industry, Catalytic Oxidizer, Paint & Coatings, Case Studies, Fastener Coating, Installation

CPI Installs Thermal Oxidizer for VOC Control of Engine Dynamometer Test Cells

Posted by Jan Carlson

Mar 4, 2014 5:19:00 AM

The worlds largest automotive manufacturer recently installed our QUADRANT SR-Series Thermal Oxidizer to destroy CO and VOC emissions from the exhaust generated by an engine dyno test cell facility. The test facility houses several engine, transmission, and chassis dynamometer’s for gasoline and diesel testing. The manufacturer demanded a system that would provide the highest uptime reliability and highest performance.

Topics: VOC Emissions, Thermal Oxidizer, Automotive Industry, Case Studies, Heat Exchanger, Installation, Engine Dyno Test Cell

Canadian Biofuel Manufacturer requires Air Pollution Control

Posted by Jan Carlson

Mar 4, 2014 5:16:00 AM

With the expected rise in oil prices in the next few years, the increasing instability of the world oil supply, and the increasing demands from the EPA for cleaner fuels and production processes, Food and Plant based Ethanol production is on the rise. Along with this rise in production comes an increased requirement for Air Pollution Control Solutions in the Bio-Fuel’s market.

Topics: Thermal Oxidizer, Case Studies, Installation

Can Coater Chooses the Quadrant SR Thermal Oxidizer for VOC Control

Posted by Jan Carlson

Mar 4, 2014 5:15:00 AM

A metal can decorator worked with Catalytic Products International, Inc to design a unique Thermal (recuperative) Oxidizer. A recuperative thermal oxidizer was chosen over other thermal oxidation systems because of high solvent loads exhausted from the company’s can coating lines and a desire to integrate customized energy recovery system.

Topics: Thermal Oxidizer, Metal Decorating, Case Studies, Installation, Heat Recovery

Flexographic Printer installs Regenerative Thermal Oxidizer for VOC Control

Posted by Jan Carlson

Mar 4, 2014 5:14:00 AM

A flexographic printer recently installed a TRITON-Regenerative Thermal Oxidizer (RTO) from Catalytic Products International, Inc. CPI provided a turnkey installation which included engineering and design of the RTO, the fugitive enclosure system to meet method 204, the ductwork system from all presses, foundation work, electrical integration, and rigged the oxidizer. The project was installed on time and without any added costs.

Topics: Regenerative Thermal Oxidizer, Thermal Oxidizer, Flexographic Printing, Case Studies, Installation

Thermal Oxidizer for the Chemical Industry

Posted by Jan Carlson

Mar 4, 2014 5:12:00 AM

CPI Thermal Oxidizers in Chemical Manufacturing

Topics: Thermal Oxidizer, Chemical Industry, Case Studies, Installation

Turnkey Installation for a Custom Coater

Posted by Jan Carlson

Mar 4, 2014 5:11:00 AM

A custom coating operation recently installed a TRITON-Regenerative Thermal Oxidizer (RTO) manufactured by Catalytic Products International, Inc. CPI provided a turnkey installation including engineering and design of the RTO, the fugitive enclosure system to meet method 204, the ductwork system from all production lines, foundation work, electrical integration, and rigged the oxidizer. The project was installed on time and without any added costs.

Topics: Regenerative Thermal Oxidizer, Web Coating, Case Studies, Installation

Textile Manufacturer Installs Thermal Oxidizer for VOC Control

Posted by Jan Carlson

Mar 4, 2014 5:10:00 AM

A synthetic leather manufacturer worked with Catalytic Products International, Inc. to design a unique Thermal (recuperative) Oxidizer. A recuperative thermal oxidizer was chosen because of high solvent LEL (+25%) exhausted from the process and a desire to integrate a hot oil heat recovery system to work with the oil heated production coating/curing line.

Topics: Thermal Oxidizer, Case Studies, Installation, Heat Recovery, Rebates


Regenerative Thermal Oxidizer	Thermal Oxidizer	Catalytic Oxidizer

Installation Posts

hbspt.cta._relativeUrls=true;hbspt.cta.load(329596, '93fe4736-54e6-4b69-8d32-471619d6daab', {"useNewLoader":"true","region":"na1"});

Our Topics